Assembly set includes:
- 2× top wall mounts
- 2× bottom wall mounts
- 2× top board mounts with twist lock
- 2× bottom board mounts
- 4× black screws for the board mounts
- 4× screws for wall mounting
- 4× wall plugs
- 2× spacers for mounting multiple BOARDs
Safety Notice
This product contains small parts. Small parts can be swallowed and pose a choking hazard, especially for infants and young children. Keep the product and loose individual parts out of reach of children and do not leave them unattended. The product is not a toy.
Tools required
- Drill + suitable drill bit
- Screwdriver / Cordless drill
- Hammer
- Pencil
- Spirit level
1. Determine position
Hold the BOARD in the desired position on the wall.
Align it straight and mark the 4 drill holes centrally through the openings of the mounts.
ATTENTION: The BOARD and modules are intended for indoor use only. Avoid mounting in direct sunlight or behind windows with strong sunlight. High temperatures and UV exposure can deform or permanently alter the material. For a long service life, we recommend mounting in a shady, dry place without direct sunlight.
Optional: Mounting 2 BOARDs side-by-side
If you want to mount 2 BOARDs side-by-side, 2 spacers are included.
First, hold the first BOARD in the desired position and mark the drill holes. Then, hold the second BOARD directly next to it using the spacers and align both BOARDs precisely. After that, set the first BOARD aside and mark the drill holes of the second BOARD.
Important: This step should ideally be carried out by 2 people.
If the BOARDs are aligned with the spacers, modules can later be mounted across both BOARDs.
Tip: Mounting is easiest with two people.
2. Drill holes
Put the BOARD aside.
Drill the marked holes and then insert the wall plugs with a hammer.
3. Mount brackets to the BOARD
Attach the top and bottom board mounts to the back of the BOARD.
Orientation: The logo is at the bottom right.
Important: Do not fully tighten screws initially — a little play makes subsequent mounting easier.
4. Attach wall mounts
First, screw the bottom wall mounts, then the top ones, to the wall.
Perfect alignment is not yet necessary.
5. Hang the BOARD
First, hang the BOARD slightly tilted at the bottom.
Then, place the twist mounts on top and lock them.
The slight play of the board mounts allows for easy compensation of minor drilling deviations.
6. Align & fix
Check the alignment with a spirit level.
Then tighten all screws on the board mounts and fully lock the top twist mounts.
Done — your BOARD is mounted and can be removed from the wall at any time.
